Pro-Tec Yamaha Super Jet 650 / 701 extended ride plate
+90mm
The Pro-Tec +90mm Super Jet 650 / 701 ride plate was
specifically developed for use on high horsepower superstock class and modified
class racing machines to reduce porpoising off the line and coming out of
corners. This ride plate is also recommend for use with heavier riders where
porpoising is an issue and more lift is needed at the rear of the boat.
Ride Plate Design and Development
The research and development engineers at Pro-Tec
have spent countless hours testing various ride plate designs for the Yamaha
Super Jet 650 / 701 hull while developing our extended ride plate. To improve
the performance of the Yamaha Super Jet, Pro-Tec considers the many dynamics of
water flow across the bottom of the hull and ride plate to produce the best
possible extended ride plate available. Ride plate length, shape, lift and fit
are all necessary for proper function and optimum performance from a ride plate.
Fetures and Benefits
The Pro-Tec Yamaha Super Jet extended ride plate will improve handling,
improve acceleration and reduce porpoising without sacrificing top speed.
Handling and porpoising are improved by the additional lift created by the +90mm
extended length to keep the bow of the hull planted in the water. Planting the
bow of the hull into the water provides better and more precise cornering
allowing you to go faster through the corners resulting in lower lap times and
more success on the race course. Better handling also reduces fatigue allowing
you to go faster for a longer period of time. It doesn’t matter if you are a
professional racer, amateur free rider or weekend recreational rider, a Pro-Tec
Super Jet extended ride plate will improve the performance of your boat and
increase the fun factor for you.
Manufacturing Process
All Pro-Tec extended ride plates are cast from A319
aluminum and heat treated for maximum strength. The 11-129A Super Jet extended
ride plate is powder coated silver and the 11-129F Super Jet extended ride plate is powder coated black. Powder coating the ride plate provides corrosion
protection and a long lasting professional finish.
Ultimate Performance
For the ultimate in performance it is recommended to
use a Pro-Tec extended ride plate and Moflow intake grate together. This
combination will improve handling, reduce porpoising, improve acceleration,
reduce jet pump cavitation and improve rough water hook up. The Pro-Tec Yamaha
Super Jet 650 / 701 extended ride plate and Moflow intake grate have been used
to win multiple National Championships and World Championships. Some of the
riders who have won Championships while using a Pro-Tec Super Jet ride plate
and Moflow intake grate are Chris MacClugagge, Victor Sheldon, Brent Flambures,
Rob Flores, Mike Yellich, Tera Laho, Jim Goodchild, Lisa Barsby, Ricky Sneddon,
Topher Baretto, Paul Del Rosario and many others.
Available Ride Plate Models
Pro-Tec extended ride plates and performance ride plates are also available for
many other Yamaha personal watercraft and offer the same performance benefits
as our Super Jet extended ride plate. Pro-Tec Yamaha extended ride plates are
available for the following models of Yamaha Wave Runners. All Pro-Tec ride plates are powder coated silver unless noted then they are powder coated
black.
|
|
|
Trust Pro-Tec With Your Personal Watercraft Performance
If you have never used a Pro-Tec product in the past
rest assured that we take every precaution to make sure that every item we
manufacture meets or exceeds the performance of the original equipment part you
are replacing. We do not make “generic” one type fits all products. Every item
that we develop is developed and tested on the specific model it was designed
for. During our testing we set specific parameters that must be met or exceeded
before we bring an item to market. If the item we are developing does not meet
our specific parameters that item will be scrapped and we move on to the next
item. Once we have developed and item that meets our standards we will do a
small production run so we can re-test a production unit. Once the production
unit is tested and verified that it meets our performance standards then and
only then will we bring it to market so you can enjoy the rewards of our hard
work and dedication to improving the performance of your Yamaha personal
watercraft.
No comments:
Post a Comment