Pro-Tec Yamaha GP760 / GP800 / GP1200 performance ride plate
Designed to improve performance
The research and development engineers at Pro-Tec
have spent countless hours testing various ride plate designs for the Yamaha GP760 / GP800 / GP1200 hull while developing our performance ride plate. To
improve the performance of the Yamaha GP760 / GP800 / GP1200, Pro-Tec considers
the many dynamics of water flow across the bottom of the hull and ride plate to
produce the best possible performance ride plate available. Ride plate length,
shape, lift and fit are all necessary for proper function and optimum
performance from a ride plate. The Pro-Tec Yamaha GP760 / GP800 / GP1200
performance ride plate will improve handling, improve acceleration and reduce
porpoising without sacrificing top speed. Handling and porpoising are improved
by the additional lift created by the ride plates design to keep the bow of the
hull planted in the water. Planting the bow of the hull into the water provides
better and more precise cornering allowing you to go faster through the corners
resulting in lower lap times and more success on the race course. Better
handling also reduces rider fatigue allowing you to go faster for a longer
period of time. It doesn’t matter if you are a professional racer, amateur free
rider or weekend recreational rider, a Pro-Tec GP760 / GP800 / GP1200
performance ride plate will improve the performance of your boat and increase
the fun factor for you.
Manufacturing Process
All Pro-Tec performance ride plates are cast from
A319 aluminum and heat treated for maximum strength. The 11-124A GP760 / GP800/ GP1200 performance ride plate is powder coated silver and the 11-124F GP760 /GP800 / GP1200 performance ride plate is powder coated black. Powder coating
the ride plate provides corrosion protection and a long lasting professional
finish.
Ultimate Handling
For the ultimate in performance it is recommended to use a Pro-Tec
performance ride plate and Moflow intake grate together. This combination will
improve handling, reduce porpoising, improve acceleration, reduce jet pump
cavitation and improve rough water hook up. The Pro-Tec Yamaha GP760 / GP800 /GP1200 performance ride plate and Moflow intake grate have been used by
customer all around the world to improve the performance of their GP760’s,GP800’s and GP1200’s.
Yamaha Wave Runner Performance Ride Plates
Pro-Tec performance ride plates and extended ride plates are also available for many other Yamaha personal watercraft models and
offer the same performance benefits as our GP760 / GP800 / GP1200 performance
ride plate. Pro-Tec Yamaha performance ride plates and extended ride plates are
available for the following models of Yamaha Wave Runners. All Pro-Tec
performance ride plates and extended ride plates are powder coated silver
unless noted then they are powder coated black.
|
|
|
Be confident. Pro-Tec performs !
If you have never used a Pro-Tec product in the past
rest assured that we take every precaution to make sure that every item we
manufacture meets or exceeds the performance of the original equipment part you
are replacing. We do not make “generic” one type fits all products. Every item
that we develop is developed and tested on the specific model it was designed
to be used on. During our testing we set specific parameters that must be met
or exceeded before we bring an item to market. If the item we are developing
does not meet our specific parameters that item will be scrapped and we move on
to the next item. Once we have developed and item that meets our standards we
will do a small production run so we can re-test a production unit. Once the
production unit is tested and verified that it meets our performance standards
then and only then will we bring it to market so you can enjoy the rewards of
our hard work and dedication to improving the performance of your Yamaha
personal watercraft.
No comments:
Post a Comment